Page 1 of 1

CSF is not blocking IPs in UI

Posted: 28 Oct 2013, 06:50
by Sergio
Hello Chirpy and Sarah,
just to let you know that CSF is not blocking IPs from Thailand, example:
Oct XX 11:51:12 server99 lfd[11184]: (mod_security) mod_security (id:990076) triggered by 1.0.128.41 (TH/Thailand/node-15.pool-1-0.dynamic.totbb.net): 3 in the last 3600 secs - *Blocked in csf* [LF_MODSEC]
And CSF is showing the following error:
ConfigServer Security & Firewall - csf v6.36 [1.0.128.41] is not a valid IP/CIDR
Checking on the IP origins, it shows:
IP Address assigned to: THAILAND
IP Address: 1.0.128.41 is located within the following Network:
Network: 1.0.128.0
CIDR: 1.0.128.0/17
Mask: 1.0.128.0/255.255.128.0
Network Range: 1.0.128.0 - 1.0.255.255
Total addresses: 32,768
Registrar: APNIC
Regards,
Sergio

IPv6 temp unblock

Posted: 01 Nov 2013, 22:27
by zerpex
Hi,

If you want to unblock an IP like this:
2001:067c:00e0:0000:0000:0000:0000:0005

From the GUI, it will return an error, it's not a valid IP/CIDR - if you use the real CIDR (2001:67c:e0::5/128) it will work.

Unblocking the IP 2001:067c:00e0:0000:0000:0000:0000:0005 from CLI works just fine, so seems to be a 'GUI only' issue.

Re: CSF is not blocking IPs in UI

Posted: 02 Nov 2013, 09:16
by ForumAdmin
This issue will be addressed in the next release. Thank you both for reporting it.

Re: CSF is not blocking IPs in UI

Posted: 02 Nov 2013, 09:33
by ForumAdmin
This should now be fixed in v6.37:
http://blog.configserver.com/?p=2085