Typo on configuration page
Posted: 07 Aug 2007, 06:46
It should be PT_LOAD# Check the PT_LOAD_AVG minute Load Average (can be set to 1 5 or 15 and
# defaults to 5 if set otherwise) on the server every PT_LOAD seconds. If the
# load average is greater than or equal to PT_LOAD_LEVEL then an email alert is
# sent. lfd then does not report subsequent high load until PT_LOAD_SKIP
# seconds has passed to prevent email floods.
#
# Set LF_LOAD to "0" to disable this feature
PT_LOAD =
PT_LOAD_AVG =
PT_LOAD_LEVEL =
PT_LOAD_SKIP =