Page 1 of 1
Update script freezes Hash is full
Posted: 31 Dec 2019, 20:52
by bulgin23
attempting update v13.08 to v13.10
With ipset in use and using the following update script, script freezes with message:
*ERROR* IPSET: [ipset v7.1: Error in line 65537: Hash is full, cannot add more elements]
Don't know what to do. . .
Re: Update script freezes Hash is full
Posted: 26 Feb 2020, 13:24
by oderland_david
Try increasing the hash size in csf.conf.
Code: Select all
# The following sets the hashsize for ipset sets, which must be a power of 2.
#
# Note: Increasing this value will consume more memory for all sets
# Default: "1024"
LF_IPSET_HASHSIZE = "1024"
Re: Update script freezes Hash is full
Posted: 07 Feb 2022, 17:20
by danfbach
Were you ever able to get this working?
Increasing hashsize just led to the restart script hanging instead of erroring out.
Re: Update script freezes Hash is full
Posted: 28 Sep 2023, 15:13
by cloudseeder
Increasing the LF_IPSET_MAXELEM setting resolved the problem for me. You can figure out how hight to go by watching the output from css as it starts.
CC_ALLOWPORTS all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set cc_us src
csf: IPSET loading set cc_us with 98413 entries
IPSET: [ipset v6.38: Error in line 98035: Hash is full, cannot add more elements] <-------- HERE IS THE ISSUE
csf: IPSET creating set cc_ca
CC_ALLOWPORTS all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set cc_ca src
csf: IPSET loading set cc_ca with 13441 entries
csf: IPSET creating set cc_mx
CC_ALLOWPORTS all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set cc_mx src
csf: IPSET loading set cc_mx with 2723 entries
csf: IPSET creating set cc_bm
CC_ALLOWPORTS all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set cc_bm src
csf: IPSET loading set cc_bm with 96 entries
csf: IPSET creating set cc_cr
CC_ALLOWPORTS all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set cc_cr src
csf: IPSET loading set cc_cr with 483 entries
The error was:
*ERROR* IPSET: [ipset v6.38: Error in line 98035: Hash is full, cannot add more elements]
The resolution was to increase LF_IPSET_MAXELEM to 100000:
# Note: Increasing this value will consume more memory for all sets
# Default: "65536"
LF_IPSET_MAXELEM = "100000"