ConfigServer Community Forum

Hi all,
I wondering if I have something forgotten in my configuration for my cluster set-up?
Cluster_Sendto has all 4 IPs, Cluster Recvfrom, all 4 IPs, Cluster block = on, Cluster config = off
Same config on all 4 servers.

4 servers are in the cluster, it works partly fine, but it is not blocking IPs from LFD. and Network Classes.

- cping command PONGS! happily back,
- lfd cluser members are sending blocks done with *Port Scan*, so that works fine.

-] What doesn't work is the Network Class C block, that is not synced between the 4 servers.
-] Manual blocking this IP range in the csf - ConfigServer lfd Cluster, Cluster deny shows it blocks it but looking in any of these 4 servers nothing really happened, see messages below, anyone any idea if something in my configuration is missing?

*** I tried on the command prompt csf -cd 95.213.177.0/24
Sent request to xxxx, replied: [Received]
But nothing was received in the cluster, and not even added on the server in which I run the command, weird.

Thank you
-----------------------------------------
Time: Fri Mar 3 04:40:27 2017 +0100
Block: 95.213.177.0/24
Hits: 3

IP addresses that triggered the block
Fri Mar 3 00:25:55 2017 95.213.177.125
Fri Mar 3 04:40:26 2017 95.213.177.125
Fri Mar 3 04:40:26 2017 95.213.177.124
----------------------------------------

Cluster Deny 95.213.177.0/24...

Sent request to xxxx, replied: [Received]
Sent request to xxxx, replied: [Received]
Sent request to xxxx, replied: [Received]
Sent request to xxxx, replied: [Received]

...Done.
--------------------------------------------
Cluster PING...

Sent request to xxxx, replied: [PONG!]
Sent request to xxxx, replied: [PONG!]
Sent request to xxxx, replied: [PONG!]
Sent request to xxxx, replied: [PONG!]

...Done.

Clustering doesn't currently allow CIDR blocking. I'm not sure why it was implemented that way, but we'll look at it again soon.

Thank you for confirmation,

Thanks very much for fixing it that fast!